Mathematical model of the heat interaction between the metal matrix and the reinforcement phase during the production of Metal Matrix Composites
Open Access
- 30 June 2018
- journal article
- Published by Technical University of Varna in ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA
- Vol. 2 (1), 1-8
- https://doi.org/10.29114/ajtuv.vol2.iss1.61
Abstract
This present paper is relevant to the establishment on mathematical model of the heat interaction between the metal matrix (liquid phase- Cu) and a reinforcement (solid- Fe) phase, during the production of the Metal Matrix Composites (MMCs) by the method of capillary molding. In this case is substituted heat object with a mathematical model drawn up and grounded to investigation of the original behavior and properties, clarifies temperature fields in bodies. The established simulation clarifies temperature fields and the causal liaison between the metal matrix and the reinforcement phase in the formation of the macro and microstructure at the time of production of MMCs. Casting process simulation is an approved method for the optimization of the methods of casting technology. The basic opportunities, ideology and structure of the software "MATLAB FEA" are introduced to simulate casting technology. The possibilities of the product are illustrated by the results obtained from a computer simulation by the technical process of the production of MMCs.Keywords
This publication has 4 references indexed in Scilit:
- Topology-generating interfacial pattern formation during liquid metal dealloyingNature Communications, 2015
- Effect of heat treatment on phase structure and thermal conductivity of a copper-infiltrated steelJournal of Materials Science, 2015
- Computation of Interfacial Thermal Resistance by Phonon Diffuse Mismatch ModelMATERIALS TRANSACTIONS, 2007
- Diffusion in copper and copper alloys part IV. Diffusion in systems involving elements of group VIIIJournal of Physical and Chemical Reference Data, 1976