Finite Element Analysis of Electromagnetic Clutch
Open Access
- 7 June 2022
- journal article
- Published by Orclever Science and Research Group in The European Journal of Research and Development
- Vol. 2 (2), 475-490
- https://doi.org/10.56038/ejrnd.v2i2.94
Abstract
Electromagnetic clutches are systems used in many applications like packaging machines, wire tensioning units, printing machines, etc. The main components of the electromagnetic clutch are coil, lining, body, armature, and rotor pulley. It becomes active when the system gives DC electric current to the coil. The magnetized body exerts an attraction force on the armature and transmits torque depending on the friction coefficient of the lining. In this study, magnetic and structural analyzes of the electromagnetic clutch are commercially used with a torque of 7 Nm were performed with a finite element-based Ansys software. As a result of the study, tensile forces, torque values, and magnetic flux density were obtained. The results were analyzed and data were created for future studies.Keywords
This publication has 7 references indexed in Scilit:
- Design and control of electromagnetic clutch actuation system for automated manual transmissionIOP Conference Series: Materials Science and Engineering, 2017
- A field modulated electromagnetic clutch with slip controlPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2017
- Analysis on temperature field of electromagnetic clutch of in-wheel motor for micro-electric vehicleInternational Journal of Electric and Hybrid Vehicles, 2016
- Proposal of Electromagnetic Clutch Structure to Suppress Surge VoltageIEEE Transactions on Magnetics, 2014
- Simulation and experimental study on electromagnetic field in magnetic particle clutchPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2011
- Torque Analysis and Shape Optimization of Electromagnetic ClutchKey Engineering Materials, 2010
- Development of Direct Electromagnetic Clutch SystemSAE International Journal of Advances and Current Practices in Mobility, 2005