Kablosuz haberleşme uygulamaları için boyutu küçültülmüş basılı log-periyodik çift kutuplu anten
- 7 April 2020
- journal article
- research article
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
- Vol. 35 (3), 1631-1646
- https://doi.org/10.17341/gazimmfd.484537
Abstract
Tr en Bu çalışmada, kablosuz haberleşme uygulamaları için boyutları birinci dereceden yarı çember yapılar kullanılarak azaltılmış çift kutuplardan oluşan bir basılı log-periyodik çift kutuplu anten (LPÇKA) önerilmiştir. Antenin besleme hattının başlangıcına dikdörtgen küçük yamalar eklenmesi ve sonuna dikdörtgen oyuklar açılarak bant genişliği arttırılmıştır. Yarı çemberlerin kullanımı ile standart basılı LPÇKA’in boyutlarına göre önerilen antende yaklaşık %14 oranında bir azalma elde edilmiştir. Yarı çember yapılar, boyut küçültmenin yanında antenin çalışma frekansının üst bandını Bluetooth ve 2,4 GHz Wi-Fi kablosuz haberleşme frekanslarını da kapsayacak şekilde 2,5 GHz’e çıkarmış olup dikdörtgen yarık ise alt bandı RFID ve GSM 900 frekanslarını içerecek şekilde 0,86 GHz seviyelerine çekmiştir. Üretilen yapının ölçüm sonuçlarına göre, antenin birçok kablosuz haberleşme uygulamasında kullanılabilecek şekilde 0,86 GHz ile 2,5 GHz aralığı gibi geniş bir çalışma frekansında 10 dB’den iyi geri dönüş kaybına, 4,75 dBi ± 0,75 dBi gibi oldukça kararlı/düşük değişimli bir anten kazancına ve literatürdeki benzer çalışmalara göre daha küçük boyutlara sahip olduğu görülmüştür. In this study, it is proposed a printed log-periodic dipole antenna (LPDA) for wireless communication applications, which consists of dipoles having reduced dimensions by using first order semicircle structures. The bandwidth is increased by adding small rectangular patches to initial part of antenna feed line and putting slots to the end. A size reduction of about 14% is obtained in the proposed antenna in comparison with the standard printed LPDA with the usage of semicircle structures. In addition to size reduction while semicircle structures also increase the upper band of the antenna operating frequency to 2.5 GHz to cover wireless communication frequencies of Bluetooth and 2.4 GHz Wi-Fi, rectangular slot decreases to the lower band to around 0.86 GHz to include RFID and GSM 900 frequencies. According to measurement results of the manufactured structure, the antenna is observed to have return loss better than 10 dB, a quite stable/low variation gain as 4.75 dBi ± 0.75 dBi and compact size as compared to similar studies in literature at a wideband operating frequency of 0.86 GHz and 2.5 GHz, which can be used in several wireless communication systems.Keywords
This publication has 22 references indexed in Scilit:
- Compact log‐periodic dipole array antenna with bandwidth‐enhancement techniques for the low frequency bandIET Microwaves, Antennas & Propagation, 2017
- Design of a printed log-periodic dipole antenna (LPDA) for 0.8–2.5 GHz band applicationsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2016
- Wide-Beam SIW-Slot Antenna for Wide-Angle Scanning Phased ArrayIEEE Antennas and Wireless Propagation Letters, 2016
- Size Reduction of Printed Log-peri odic Dipole Array Antenna Using Fractal Koch GeometryInternational Journal on Electrical Engineering and Informatics, 2015
- Subsectional Tapered Fed Printed LPDA Antenna With a Feeding Point PatchIEEE Antennas and Wireless Propagation Letters, 2015
- A NOVEL MEANDER LINE MICROSTRIP LOG-PERIODIC DIPOLE ANTENNA FOR DUAL-POLARIZED RADAR SYSTEMSProgress In Electromagnetics Research Letters, 2015
- The Simulation and Experiment of a Non-Cross-Feeding Printed Log-Periodic AntennaInternational Journal of Antennas and Propagation, 2015
- Miniaturized LPDA Antenna for Portable Direction Finding ApplicationsETRI Journal, 2012
- The Design and Optimization of Planar LPDAsPIERS Online, 2008
- A new bi‐faced log periodic printed antennaMicrowave and Optical Technology Letters, 2005