Electromagnetic properties of zinc–nickel ferrites in the frequency range of 0.05–10 GHzShow More
Materials Today Chemistry , Volume 20; doi:10.1016/j.mtchem.2021.100460
Abstract: Znx-1NixFe2O4 samples have been synthesized by solid-state reactions. Data on the chemical composition and the surface morphology of the samples have been obtained using a scanning electron microscope. X-ray powder diffractometer has been used to establish the phase purity and to determine the unit cell parameters. It has been found that the obtained samples had the spinel structure with Fd-3m (No. 227) space group. The unit cell parameters decrease with increasing nickel concentration. The magnetic characteristics of the obtained samples are determined and discussed. The Curie point of obtained samples varies in the range of 803.5–572.7 K. The maximum spontaneous magnetization of ~74.6 emu/g at room temperature was fixed for the solid solution with x = 0.6. The maximum value of the μ/real part of ~12 and μ//imaginary part of 6 of the permeability in the frequency range of 50 MHz–10 GHz is observed for the composition with x = 0.3. The composite samples for microwave study were prepared by mixing the ferrite powders with molten paraffin wax. The largest value of the μ/ real part of ~3 and μ// imaginary part of 0.63 of permeability is found for the x = 0.4 composite. The formation of the composite significantly reduces permeability.
Keywords: Ferrospinel / Crystal structure / Nanoparticles / Magnetization / Permeability / Composites
Scifeed alert for new publicationsNever miss any articles matching your research from any publisher
- Get alerts for new papers matching your research
- Find out the new papers from selected authors
- Updated daily for 49'000+ journals and 6000+ publishers
- Define your Scifeed now
Click here to see the statistics on "Materials Today Chemistry" .