Effect of High-pressure Quenching on Pure-iron Martensite Transformation and Its Strengthening Mechanism
Open Access
- 15 November 2022
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 62 (11), 2374-2381
- https://doi.org/10.2355/isijinternational.isijint-2022-167
Abstract
Industrial pure iron samples were austenitized and quenched (6°C/s cooling to room temperature) under hydrostatic pressure of 3–5 GPa. The morphology, phase transformation and strengthening mechanism of high-pressure quenched martensite are analyzed by the method of SEM, XRD, EBSD, and TEM. Lath martensite with hierarchical packet-block-lath structure is induced in industrial pure iron by high pressure, which keeps the Kurdjumov-Sachs (K-S) orientation relationship with the face-center-cubic (FCC) phase. Pressure refines the size of prior austenite by depressing the mobility of grain boundaries, leading to the decrease of the type of martensite variants. with the increment of pressure, the dislocation density increases gradually (2.04×1013 to 3.14×1014 m−2) and the martensite blocks are refined from 3.3 to 0.9 µm. In addition, an enormous number of twin boundaries and high-density dislocations are observed in 5 GPa-samples, which is fairly rare in lath martensite of low carbon steels. Superior tensile performances are obtained in industrial pure iron, especially in 5 GPa-sample with ultra-high yield strength of 700 MPa and excellent ductility of 27%. The strengthening mechanism is quantitatively analyzed by Olson’s strengthening model, and the results show that both of dislocation strengthening and Hall-Petch strengthening enhances with the increase of pressure. Based on the above findings, martensite transformation can be effectively controlled by hydrostatic pressure, which extends the knowledge into martensitic transformation mechanism and offers a new avenue for developing high performance metal materials.Keywords
This publication has 34 references indexed in Scilit:
- The Latest Development on the Heat Treatment, Microstructure and Mechanical Properties of Low-Carbon Martensite SteelAdvanced Materials Research, 2013
- Microstructures and hardness of as-quenched martensites (0.1–0.5%C)Acta Materialia, 2011
- Hall–Petch relation and boundary strengtheningScripta Materialia, 2004
- Calculating the Peierls energy and Peierls stress from atomistic simulations of screw dislocation dynamics: application to bcc tantalumModelling and Simulation in Materials Science and Engineering, 2004
- The morphology and crystallography of lath martensite in Fe-C alloysActa Materialia, 2003
- High pressure in solid-state chemistryJournal of Physics: Condensed Matter, 2002
- Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensiteActa Materialia, 2002
- Microstructure Evolution During Normal Grain Growth Under High Pressure in 2-D Aluminium FoilsTextures and Microstructures, 1999
- Lattice-parameter variation with carbon content of martensite. I. X-ray-diffraction experimental studyPhysical Review B, 1995
- High Pressure Effects on the Martensitic TransformationsJournal de Physique IV, 1995