Analysis of the forced convection of two-phase Ferro-nanofluid flow in a completely porous microchannel containing rotating cylinders

Abstract

In the present work, the forced convection of nanofluid flow in a microchannel containing rotating cylinders is investigated in different geometries. The heat flux applied to the microchannel wall is 10,000 W m⁻². The effects of Reynolds number, the volume fraction of nanoparticles, and the porosity percentage of the porous medium are investigated on the flow fields, temperature, and heat transfer rate. Reynolds number values vary from Re = 250–1000, non-dimensional rotational velocities 1 and 2, respectively, and volume fraction of nanoparticles 0–2%. The results show that increasing the velocity of rotating cylinders increases the heat transfer; also, increasing the Reynolds number and volume fraction of nanoparticles increases the heat transfer, pressure drop, and C_f,ave. By comparing the porosity percentages with each other, it is concluded that due to the greater contact of the nanofluid with the porous medium and the creation of higher velocity gradients, the porosity percentage is 45% and the values of are 90% higher than the porosity percentage. Comparing porosity percentages with each other, at porosity percentage 90% is greater than at porosity percentage 45%. On the other hand, increasing the Reynolds number reduces the entropy generation due to heat transfer and increases the entropy generation due to friction. Increasing the volume fraction of nanoparticles increases the entropy generations due to heat transfer and friction.