Theoretical and Experimental Performance Analysis of a Novel Domestic Biogas Burner
Open Access
- 16 September 2020
- journal article
- research article
- Published by Hindawi Limited in Journal of Energy
- Vol. 2020, 1-9
- https://doi.org/10.1155/2020/8813254
Abstract
The inefficient indoor burning of fuelwood on traditional cookstoves generates pollutants, primarily carbon monoxide and many other human health-damaging emissions. It is from this risk that it is necessary to have an immediate shift to alternative cleaner fuel sources. Biogas, which is among the biofuels from biomass, is one of the resources that play a considerable part in a more diverse and sustainable global energy mix. For domestic purposes in rural areas of Tanzania, biogas provides a better option that can supplement the use of fossil fuels such as wood, charcoal, and kerosene, which is nonrenewable. However, the low efficiency experienced in the locally made biogas burners hinders the large-scale use of biogas among the population in the country. With the locally made burners, the users of biogas for the domestic application face problems including heat loss and high gas consumption which affects the whole cooking process. It is against this backdrop that the current study objectives incline on designing and improving the efficiency of the locally manufactured burners to achieve the uniform flow of fuel in the mixing chamber, which will result to the consistent heat distribution around the cooking pot. The optimization of the burner was done by using computational fluid dynamics (CFD) through varying the number of flame portholes and air holes as well as the size of the jet before fabrication. The increased efficiency of the burner has also contributed by the addition of the fuel distributor. The results showed that the optimum hole diameter of the jet was 2.5 mm and that of the manifold was 100 mm. The currently developed biogas burner was tested and compared with the other two locally made burners. The water boiling test (WBT) on these three burners showed that the developed burner has a thermal efficiency of 67.01% against 54.61% and 58.82% of the Centre for Agricultural Mechanization and Rural Technology (CARMATEC) and Simgas, respectively. Additionally, the fuel consumption of the developed burner was 736 g/L as compared to 920 g/L for CARMARTEC and 833 g/L for that of Simgas. The developed burner and its corresponding cookstove are both environmentally friendly and economical for household utilization in Tanzania and other developing countries.Keywords
Funding Information
- Water Infrastructure and Sustainability of Energy Futures (PI51847)
This publication has 14 references indexed in Scilit:
- Socio-economic, health and agriculture benefits of rural household biogas plants in energy scarce developing countries: A case study from PakistanRenewable Energy, 2017
- Biogas Cook Stoves for Healthy and Sustainable Diets? A Case Study in Southern IndiaFrontiers in Nutrition, 2015
- Female Labor Force Participation and Household Dependence on Biomass Energy: Evidence from National Longitudinal DataWorld Development, 2015
- Biogas appliances in Sub-Sahara AfricaBiomass and Bioenergy, 2014
- Biogas as a sustainable energy source for developing countries: Opportunities and challengesRenewable and Sustainable Energy Reviews, 2014
- Methane production from lignocellulosic agricultural crop wastes: A review in context to second generation of biofuel productionRenewable and Sustainable Energy Reviews, 2012
- A Review of Biomass Energy Dependency in TanzaniaEnergy Procedia, 2011
- Biomass energy and the environmental impacts associated with its production and utilizationRenewable and Sustainable Energy Reviews, 2010
- Dairy farming and biogas use in Rungwe district, South-west Tanzania: A study of opportunities and constraintsRenewable and Sustainable Energy Reviews, 2008
- The prediction of laminarization with a two-equation model of turbulenceInternational Journal of Heat and Mass Transfer, 1972