Study of Two-Phase Microchannel Heat Sink Fabricated by A.M. Technology for Energy Reuse in the Electronic Device

Abstract

Data centers’ electricity energy consumption accounts for 1% of global electricity demand and 0.3% of all global CO₂ emissions. Energy reuse as a core of a net zero carbon data center, as a macro goal benefiting to mankind, needs micro innovations from thermal engineers to reclaim the distributed and low-grade thermal energy from diversified electronic equipment. This article presents the attempt to combine the advantages of high-density heat transferring technology by two-phase microchannels and the agility of Additive Manufacturing (A.M.) technology into a heat sink by which thermal energy can be collected in premium quantity and quality. The heat sink prototype adopted the two-layer microchannel design by leveraging the unique capability of A.M. technology to form complicated spatial geometric features, such as the functional channel profiles with diverged cross-sections along the flow direction, intermittent channels, and curved channels. It was fabricated at one-time processing by AlSi10Mg powder SLS/SLM, had an exterior base area of 25 cm², and interior micro-fins with a minimal thickness of 0.2 mm and fin pitch of 0.38 mm. A test rig had been built to validate the thermal dynamic and hydraulic performance of this microchannel heat exchanger working with HFE 7100 as the coolant. The heat flux under certain wall superheat and pressure drop catches the equivalent grade of microchannels made by conventional micro-cutting approaches on copper or aluminum. The maximum inlet coolant temperature could be elevated up to 60.0 °C with less than 90.0 °C CPU case temperature, which provides the feasibility of high-grade heat recovery. The test results present the promising prospects of this design and A.M. technology in the field of two-phase microchannel heat exchanging, by which the electronic devices in megawatt hyperscale data center can be changed from energy consumers to energy generators for the greenhouse, district heating, and hot water system.