Until recently many of the wells on US land that were drilled using Managed Pressure Drilling (MPD) technology utilized one size fits all equipment designed for the offshore market. Since the cost and personnel requirements needed to run the offshore manifolds became a challenge due to market conditions and Covid-19 restrictions, the drillers sought a cost effective and simpler system to conduct their day-to- day operations. The challenge was to drill long laterals in Permian and Haynesville without losing the necessary MPD functionality that proved beneficial to reduce the risks associated with safety and to enhance drilling efficiency. For the MPD control system experts, the task was to correctly identify and automate MPD system’s functionality that would be of greatest use to the drillers to sustain their drilling performance. The concept of developing an easier to operate control system was undertaken wherein system accuracy and precision was maintained at the forefront of the development process. Electric motors/actuators and necessary drivers that could work directly on rig power were selected and tested. Control system logic that operates the chokes was modified to quickly adapt to the changes in drilling conditions, maintaining the necessary accuracy. This was done by studying and understanding drillers activities and behaviors like automated pump ramp down speed during connections, pipe movement during tripping etc. Specific MPD engineering charts, simple to decipher graphs, and necessary calculation tables were developed for the drillers to use for managing bottomhole pressures. Calculations which included specific schedules for spotting weighted pills were provided to maintain simplicity of the operations and something the drillers could easily execute. Today, many drillers are using this MPD solution to drill long laterals (Hovland et.al 2020). This trend is slowly leading to reduction of rig MPD personnel, especially during Covid-19, while the drillers are getting familiar with and operating MPD systems. A few of the crucial items that have allowed the drillers to run MPD on their own include MPD controls connected to drilling automation systems and the subsequent continuous revision of these controls based on understanding drillers tasks and needs. The use of electric motors enabled quick adoption to the changing drilling conditions while making connections, tripping etc. The furnished MPD calculations and graphs that drillers could follow for applying required MPD choke pressures kept MPD adaption simpler. The modifications made to the MPD choke controls geared towards facilitating necessary automation enabled the drillers to get trained in few days and operate the MPD systems while maintaining the same level of speed and performance.