Melt pool forming a buttonhole in tailored blank welding with multiple laser spots
Open Access
- 1 November 2021
- journal article
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1135 (1)
- https://doi.org/10.1088/1757-899x/1135/1/012022
Abstract
Laser beam welding of tailored blank butt joints of different sheet thickness generates asymmetric melt pool conditions. By employing two, three or four tailored laser beams, additional options for shaping the melt pool conditions can be offered. As observed by high speed imaging, in most multi-spot cases a large stable buttonhole was generated, by the trailing laser beams asymmetrically towards the thinner sheet. Correspondingly, the ablation pressure from the multiple boiling fronts has generated a fast melt jet, particularly along the thicker sheet. In many cases the boiling front kept open to the keyhole rear. The buttonhole differs from the Catenoid-like shape reported earlier. The walls are steeper and the horizontal shape can be asymmetric. The melt pool can switch between different stable modes. Inclined arrangement of three beams enabled even two separate, parallel boiling fronts and melt jets, combining behind the opening. Despite the large buttonhole, sound welds were achieved. Solely for four equal laser beams, arranged as a square, a melt pool without buttonhole was generated. Provided the driving forces from the ablation pressure along with the melt flow are sufficiently explored and understood, new opportunities to optimize the welding process are available.This publication has 17 references indexed in Scilit:
- Analytical heat conduction modelling for shaped laser beamsJournal of the American Academy of Dermatology, 2017
- Self-consistent modeling of keyhole and weld pool dynamics in tandem dual beam laser welding of aluminum alloyJournal of the American Academy of Dermatology, 2015
- Absorption homogenization at wavy melt films by CO2-lasers in contrast to 1μm-wavelength lasersApplied Surface Science, 2015
- Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laserJournal of the American Academy of Dermatology, 2014
- A review on tailored blanks—Production, applications and evaluationJournal of the American Academy of Dermatology, 2013
- Surface tension stabilized laser welding (donut laser welding)—A new laser welding techniqueJournal of Laser Applications, 2013
- Measurements of fluid flow on keyhole front during laser weldingScience and Technology of Welding and Joining, 2011
- Experimental observation of keyhole shapes in the laser welding of aluminum blanksJournal of Laser Applications, 2007
- Keyhole shapes during laser welding of thin metal sheetsJournal of Physics D: Applied Physics, 2007
- Metallic vapor ejection effect on melt pool dynamics in deep penetration laser weldingJournal of Laser Applications, 2004