Measurement of flow and pressure characteristics of combustion engine oil filters
Open Access
- 6 December 2021
- journal article
- research article
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 351, 01004
- https://doi.org/10.1051/matecconf/202135101004
Abstract
For the purpose of measuring the flow and pressure characteristics of oil filters used in vehicles with internal combustion engines, a laboratory test equipment was used, which was designed at the Department of Transport and Handling of the Slovak University of Agriculture in Nitra. The target information from the given measurement is the obtained data on the change of flow and pressure, based on the type of oil filter used. The contribution of this paper is information that can be used in the future in the design of new filtration equipment, as well as the creation of a system for evaluating the technical life of motor oils, in order to extend the service intervals of motor oil, monitored set of motor vehicles.Keywords
This publication has 8 references indexed in Scilit:
- Laboratory tests of the hydraulic pump operating load with monitoring of changes in the physical propertiesMeasurement and Control, 2021
- Design of Laboratory Test Equipment for Testing the Hydrostatic TransducersActa Technologica Agriculturae, 2021
- ANALYSIS OF DEGRADATION OF ECOLOGICAL TRANSMISSION-HYDRAULIC FLUIDS USED IN AGRICULTURAL AND FORESTRY MACHINERYPublished by Ustav Teoreticke a Aplikovane Mechaniky AC CR ,2020
- Identification of operating fluids with fingerprint method utilization19th International Scientific Conference Engineering for Rural Development Proceedings, 2018
- Evaluation of Hydraulic Resistance in Various Liquids and TemperatureTribology in Industry, 2017
- Analysis of the Effect of Loading Process on Tribological System PropertiesActa Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2016
- Design of a laboratory hydraulic device for testing of hydraulic pumpsActa Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2013
- Testing stands for laboratory tests of hydrostatic pumps of agricultural machineryResearch in Agricultural Engineering, 2008