Electromagnetic and Mechanical Characteristics Analysis of a Flat-Type Vertical-Gap Passive Magnetic Levitation Vibration Isolator
Open Access
- 26 December 2016
- journal article
- research article
- Published by Hindawi Limited in Shock and Vibration
- Vol. 2016, 1-12
- https://doi.org/10.1155/2016/5327207
Abstract
In this paper, we describe a flat-type vertical-gap passive magnetic levitation vibration isolator (FVPMLVI) for active vibration isolation system (AVIS). A dual-stator scheme and a special stator magnet array are adopted in the proposed FVPMLVI, which has the effect of decreasing its natural frequency, and this enhances the vibration isolation capability of the FVPMLVI. The structure, operating principle, analytical model, and electromagnetic and mechanical characteristics of the FVPMLVI are investigated. The relationship between the force characteristics (levitation force, horizontal force, force ripple, and force density) and major structural parameters (width and thickness of stator and mover magnets) is analyzed by finite element method. The experiment result is in good agreement with the theoretical analysis.Keywords
Funding Information
- National Natural Science Foundation of China (51507034)
This publication has 16 references indexed in Scilit:
- System-Level Design Optimization Method for Electrical Drive Systems—Robust ApproachIEEE Transactions on Industrial Electronics, 2015
- Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffnessJournal of Sound and Vibration, 2014
- System-Level Design Optimization Methods for Electrical Drive Systems: Deterministic ApproachIEEE Transactions on Industrial Electronics, 2014
- Theoretical and experimental analyses of a nonlinear magnetic vibration isolator with quasi-zero-stiffness characteristicJournal of Sound and Vibration, 2013
- Design study on a magnetic gravity compensator with unequal magnet arraysMechatronics, 2012
- Modeling and analysis of a negative stiffness magnetic suspension vibration isolator with experimental investigationsReview of Scientific Instruments, 2012
- Theoretical analysis of a non-contact spring with inclined permanent magnets for load-independent resonance frequencyJournal of Sound and Vibration, 2012
- Theoretical design parameters for a quasi-zero stiffness magnetic spring for vibration isolationJournal of Sound and Vibration, 2009
- Vibration isolation with magnet springsReview of Scientific Instruments, 2002
- Extreme ultraviolet lithographyIEEE Journal of Quantum Electronics, 1999