Printed Band-Stop Filter for Mitigation of Electromagnetic Interference
- 10 September 2021
- journal article
- research article
- Published by AVES YAYINCILIK A.Ş. in Electrica
- Vol. 21 (3), 298-304
- https://doi.org/10.5152/electrica.2021.21018
Abstract
A new printed microstrip band-stop filter is proposed and implemented. A systematic design approach is presented to realize the filter for a specific band of operation employing the concept of SIR and embedded stub. The proposed filter design is suitable for multiple stop band applications. Moreover, the filter configuration can be easily incorporated in the microstrip feed line connected with a radiating element to reject the signal at the desired band for mitigating the electromagnetic interference. A prototype model of the proposed design is developed, and characteristics are measured and compared with the simulation result. A good agreement between the two is evident.Keywords
This publication has 10 references indexed in Scilit:
- Single-Ended and Balanced Bandpass Filters Using Multiple Pairs of Coupled Lines and Stepped-Impedance StubsIEEE Access, 2020
- Sunflower shaped fractal filtenna for WLAN and ARN applicationMicrowave and Optical Technology Letters, 2019
- Compact bandstop filters using coupled lines and open/short stubs with multiple transmission polesIET Microwaves, Antennas & Propagation, 2019
- A Wide Stopband Low-Pass Filter With High Roll-Off Using Stepped Impedance ResonatorsIEEE Microwave and Wireless Components Letters, 2018
- A stepped-impedance bandstop filter with extended upper passbands and improved pass-band reflectionsAIP Advances, 2016
- A Wideband Noise-Isolation Bandstop Power Distribution Network Using Quarter-Wavelength Line-Based StructureIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Stepped-Impedance Coupled Resonators for Implementation of Parallel Coupled Microstrip Filters With Spurious Band SuppressionIEEE Transactions on Microwave Theory and Techniques, 2012
- Bandstop filters with variable upper passbands using embedded line, spurline, and conventional microstripMicrowave and Optical Technology Letters, 2011
- Microwave notch filters using embedded stubsMicrowave and Optical Technology Letters, 2009
- Discrete‐time notch filter and its application to microwave filterMicrowave and Optical Technology Letters, 2008