Effect of Modifiers on the Microstructure of Rapidly Solidified AlSi10Mg Alloy
Open Access
- 6 December 2022
- journal article
- research article
- Published by Springer Science and Business Media LLC in Metallurgical and Materials Transactions
- Vol. 54 (2), 624-633
- https://doi.org/10.1007/s11661-022-06907-8
Abstract
No abstract availableKeywords
Funding Information
- Politecnico di Milano
This publication has 44 references indexed in Scilit:
- Structure and properties of nanostructured A357 alloy produced by melt spinning compared with direct chill ingotJournal of Alloys and Compounds, 2011
- Refinement of eutectic grains by combined addition of strontium and boron in near-eutectic Al–Si alloysScripta Materialia, 2007
- A mechanism for the poisoning effect of silicon on the grain refinement of Al–Si alloysActa Materialia, 2007
- Grain Refinement of Aluminium Alloys by InoculationAdvanced Engineering Materials, 2003
- Dynamical evolution of microstructure in finely atomized droplets of Al-Si alloysActa Materialia, 2003
- Correlation between mechanical properties and amount of dendritic α-Al phase in as-cast near-eutectic Al–11.6% Si alloys modified with strontiumMaterials Science and Engineering: A, 2002
- Grain refinement mechanisms of hypoeutectic AlSi alloysActa Materialia, 1996
- Production of Al-(12?25) wt% Si alloys by rapid solidification: melt spinning versus centrifugal atomizationJournal of Materials Science, 1992
- Solidification structures during laser treatmentScripta Metallurgica et Materialia, 1990
- Corrosion behaviour of rapidly solidified Al-Er binary and ternary alloys in NaCl solution at room temperatureJournal of Materials Science Letters, 1987