Characteristics of a paste explosive (EPX-P20) used in explosive bolts for spacecraft’s applications
Open Access
- 1 September 2019
- journal article
- research article
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 610 (1), 012039
- https://doi.org/10.1088/1757-899x/610/1/012039
Abstract
An explosive charge, located within a machined cavity in a bolt, provides the energetic stimulus required for cleanly bolt fracture. The shock wave produced fom the explosion causes tensile fracture along the bolt itself with minumum fragmentation and helps to control the separation process of the satellite from its rocket. In this study, EPX-P20 is a paste explosive in the research stage. EPX-P20 is based on PETN (pentaerythritol tetranitrate) bonded by polydimethyl-siloxane binder matrix. A computerizing mixer plastograph was used for the production of EPX-P20. The internal energy of combustion was measured and used to determine the enthalpy of formation. Sensitivity against both friction and impact stimuli were determined. The detonation properties were calculated theoretically using the EXPLO 5 soft code, while the detonation velocity was determined experimentally. For comparison, several commercial available explosives such as; Sprängdeg m/46, Formex P1, Semtex 10 and EPX-1 were investigated. It was proven that EPX-P20 possesses the lowest velocity of detonation while maintaining its very low sensitivity. Interesting inversely proportion relationship amongst the measured internal energy of combustion and the calculated heat of detonation was observed. The produced paste explosive might be used in explosive bolt for space craft's applications.This publication has 16 references indexed in Scilit:
- Thermo-analytical study of glycidyl azide polymer and its effect on different cyclic nitraminesThermochimica Acta, 2018
- Application of vacuum stability test to determine thermal decomposition kinetics of nitramines bonded by polyurethane matrixActa Astronautica, 2017
- Kinetic Parameters of PBX Based on Cis‐1,3,4,6‐tetranitroocta‐hydroimidazo‐[4,5‐d] imidazole Obtained by Isoconversional Methods using Different Thermal Analysis TechniquesPropellants, Explosives, Pyrotechnics, 2017
- Performance and Detonation Characteristics of Polyurethane Matrix Bonded Attractive NitraminesCentral European Journal of Energetic Materials, 2016
- Sensitivity and Detonation Characteristics of Selected Nitramines Bonded by Sylgard BinderPropellants, Explosives, Pyrotechnics, 2016
- Chemistry of High-Energy MaterialsPublished by Walter de Gruyter GmbH ,2015
- A Parametric Study of Ridge-cut Explosive Bolts using HydrocodesInternational Journal of Aeronautical and Space Sciences, 2015
- Separation characteristics study of ridge-cut explosive boltsAerospace Science and Technology, 2014
- Impact of a shock wave on a structure on explosion at altitudeJournal of Loss Prevention in the Process Industries, 2007
- Performance and Sensitivity of ExplosivesPropellants, Explosives, Pyrotechnics, 2000