Using a single remote-sensing image to calculate the height of a landslide dam and the maximum volume of a lake
Open Access
- 22 June 2022
- journal article
- research article
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 22 (6), 2081-2097
- https://doi.org/10.5194/nhess-22-2081-2022
Abstract
Landslide dams are caused when landslide materials block rivers. After the occurrence of large-scale landslides, it is necessary to conduct a large-scale investigation of barrier lakes and a rapid risk assessment. Remote sensing is an important means to achieve this goal. However, at present, remote sensing is only used for the monitoring and extraction of hydrological parameters, without predicting the potential hazard of the landslide dam. The key parameters of the barrier dam, such as the dam height and the maximum volume, still need to be obtained based on a field investigation, which is time consuming. Our research proposes a procedure that is able to calculate the height of the landslide dam and the maximum volume of the barrier lake using a single remote-sensing image and a pre-landslide DEM. The procedure includes four modules: (a) determining the elevation of the lake level, (b) determining the elevation of the bottom of the dam, (c) calculating the highest height of the dam and (d) predicting the lowest crest height of the dam and the maximum volume. Finally, a sensitivity analysis of the parameters used during the procedure and an analysis of the influence of the image resolution is carried out. This procedure is mainly demonstrated through the Baige landslide dam and the Hongshiyan landslide dam. A single remote-sensing image and a pre-landslide DEM are used to predict the height of each dam and the key parameters of the dam break, which are in good agreement with the measured data. This procedure can effectively support quick decision making regarding hazard mitigation.Funding Information
- Key Technologies Research and Development Program (Grant 2017YFB0504101, Grant 2021YFB3901201)
This publication has 39 references indexed in Scilit:
- Deriving landslide dam geometry from remote sensing images for the rapid assessment of critical parameters related to dam-breach hazardsLandslides, 2013
- Analysis of landslide dams induced by the 2008 Wenchuan earthquakeJournal of Asian Earth Sciences, 2012
- Breaching parameters of landslide damsLandslides, 2011
- Logistic regression model for predicting the failure probability of a landslide damEngineering Geology, 2011
- The 12 May Wenchuan earthquake-induced landslide lakes: distribution and preliminary risk evaluationLandslides, 2009
- The application of GIS-based logistic regression for landslide susceptibility mapping in the Kakuda-Yahiko Mountains, Central JapanGeomorphology, 2005
- Prediction of the behaviour of landslide dams using a geomorphological dimensionless indexEarth Surface Processes and Landforms, 2002
- Effect of impact energy on the shape of granular heapsGranular Matter, 2000
- Methods for predicting peak discharge of floods caused by failure of natural and constructed earthen damsWater Resources Research, 1997
- Earthquake-dammed lakes in New ZealandGeology, 1981