Dilatancy reversal in superplasticised cementitious mortar
- 1 August 2021
- journal article
- research article
- Published by Thomas Telford Ltd. in Magazine of Concrete Research
- Vol. 73 (16), 828-842
- https://doi.org/10.1680/jmacr.19.00435
Abstract
By electrostatic repulsion and steric hindrance, polycarboxylate based superplasticizer (SP) decreases the water demand for cement hydration in mortar/concrete production. Subsequently, less water is needed for a prescribed flowability, which improves its concurrent design limits of strength and flowability. Nonetheless, SP also introduces unfavourable dilatancy (or shear thickening) in mortar caused by clustering of mobile SP polymers in the interstitial void and adsorbed polymers on cement. Interestingly, the dilatancy does not increase monotonically with SP. Reversal of dilatancy occurs when a threshold of SP dosage is reached, and subsequent addition of SP decreases dilatancy because the fine particles in mortar are better dispersed with adequate SP. The interstitial void substantially decreases due to deflocculation of fine particles that improves wet packing density of mortar. Based on this, it is believed that by blending the cement with fly ash, and/or using multi-sized sand, the dilatancy of mortar can be alleviated. Herein, a rheology test programme of superplasticized mortar was conducted via a co-axial viscometer to: (1) find out the threshold SP dosage when dilatancy reversal occurs; (2) study the effect on dilatancy of mortar by using multi-sized powder and sand; (3) correlate the dilatancy of mortar to its wet packing density.Keywords
This publication has 69 references indexed in Scilit:
- Behaviour of uni-axially loaded concrete-filled-steel-tube columns confined by external ringsThe Structural Design of Tall and Special Buildings, 2012
- Steady state flow of cement suspensions: A micromechanical state of the artCement and Concrete Research, 2010
- Water film thickness, flowability and rheology of cement–sand mortarAdvances in Cement Research, 2010
- Effectiveness of Polycarboxylate Superplasticizers in Ultra-High Strength Concrete: The Importance of PCE Compatibility with Silica FumeJournal of Advanced Concrete Technology, 2009
- Effects of packing density, excess water and solid surface area on flowability of cement pasteAdvances in Cement Research, 2008
- Packing density of cementitious materials: part 2—packing and flow of OPC + PFA + CSFMaterials and Structures, 2007
- Packing density of cementitious materials: part 1—measurement using a wet packing methodMaterials and Structures, 2007
- A thixotropy model for fresh fluid concretes: Theory, validation and applicationsCement and Concrete Research, 2006
- A review of cement–superplasticizer interactions and their modelsAdvances in Cement Research, 2000
- Shear Rate in the Couette ViscometerTransactions of the Society of Rheology, 1968