Assessment of Surfactant Modified Activated Carbon for Improving Water Quality
Open Access
- 1 January 2019
- journal article
- research article
- Published by Scientific Research Publishing, Inc. in Journal of Encapsulation and Adsorption Sciences
- Vol. 09 (01), 13-34
- https://doi.org/10.4236/jeas.2019.91002
Abstract
Effluents containing inorganic contaminants are releasing into the environment untreated despite being hazardous to man and environment. It is costly and unsustainable to use conventional methods to remove them from dilute aqueous solution. Adsorption involving granular activated carbon is an alternative method for treating such effluents. Granular activated carbon is structurally strong, highly resistance to attrition and wearing, large and can easily separate from the effluents. However, its surface is highly hydrophobic and has little surface charge thereby reducing its adsorption capacity for anion or cation. This article reviews surfactant modification of activated carbon to enhance its adsorption capacity for inorganic contaminants and key factors affecting the adsorption efficiency. They include initial concentration of contaminants, contact time, solution pH, solution temperature, adsorbent concentration, ionic strength, competing ions, type of surfactant, and surfactant concentration. The modified activated carbon usually shows maximum contaminant uptake around its critical micelles concentration. Surfactant modification reduces specific surface area and/or micro pore volume but hot NaOH or HNO3 treatment before surfactant modification minimises this drawbacks and increases the net surface charge. Overall, surfactant modification is a simple but efficient method of enhancing adsorption capacity of activated carbon for removing anion or cation from aqueous solution. However, a handful publication is available on the regeneration of the spent (saturated) surfactant modified activated carbons. Hence, more research efforts should be directed towards proper regenerating reagents and the optimise conditions such as contact time, concentration, and temperature for regenerating spent modified activated carbons.Keywords
This publication has 52 references indexed in Scilit:
- Competitive biosorption of lead, cadmium, copper, and arsenic ions using algaeEnvironmental Science and Pollution Research, 2012
- Adsorption of bromate and competition from oxyanions on cationic surfactant-modified granular activated carbon (GAC)Chemical Engineering Journal, 2012
- Removal of Bromate (BrO−3) from Water using Cationic Surfactant-Modified Powdered Activated Carbon (SM-PAC)Separation Science and Technology, 2012
- Competition of Anions with Perchlorate for Exchange Sites on Cationic Surfactant-Tailored GACEnvironmental Engineering Science, 2011
- Evaluation of equilibrium, kinetic and thermodynamic parameters for biosorption of nickel(II) ions onto bacteria strain, Rhodococcus opacusMinerals Engineering, 2009
- Surface characteristics of crop-residue-derived black carbon and lead(II) adsorptionWater Research, 2008
- Biosorption of precious metalsBiotechnology Advances, 2007
- Adsorption of polyelectrolytes onto oxides — the influence of ionic strength, molar mass, and Ca2+ ionsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2000
- Liquid chromatographic determination of methylamines. Determination of trimethylamine in fish samples using a porous graphitic carbon stationary phaseAnalytica Chimica Acta, 1996
- Separation of heavy metals from industrial waste streams by membrane separation technologyWaste Management, 1993