The article describes morphological and typological characteristics of non-ferrous metal, determines the for-mulae of alloys, as well as identifies techniques used for the production of tools by the Alekseyevka-Sargary cul-ture from the South Trans-Urals (15th/14th and 12th/11th BC). We carried out the morphological and typological study of the non-ferrous metal along with the X-ray fluorescence (Institute of Archaeology RAS, Institute of Mine-ralogy UB RAS; X-MET3000TX analysers from Oxford Instruments Analytical, M1 Mistral from Bruker Nano GmbH) and metallographic (Tyumen Scientific Centre SB RAS; Zeiss Axio Observer D1m microscope) analyses. A total of 19 tools exhibiting morphology inherent to the tool collections of the Alekseyevka-Sargary culture were selected for the study. These tools comprised random finds and items from the settlements of the Chelyabinsk and Kurgan regions of Russia, as well as from the Kostanay Region of Kazakhstan: daggers, а spearhead, sick-les, socketed chisels, a spear end cap and single-blade knives. A group of tools and weapons characteristic of all Eurasian cordoned-ware cultures was distinguished — daggers with handguards and socketed grooved chisels. In addition, weapons characteristic of the sites attributed to the Alekseyevka-Sargary culture (Saryarka, Altai, and Semirechye) were identified within the weapon complex of the South Trans-Urals. These weapons included bush hooks of the Sosnovaya Maza type, knives having marked handles, spearheads with holes and socketed straight-blade chisels. The metal of the South Trans-Urals is distinguished by the marked heterogeneity of its chemical composition with the predominance of low-alloyed bronzes Cu–Sn, Cu–Sn–As and Cu–As (66.7 %). There are 4 pure copper items, as well as products from the complex alloy Cu–Sn–As–Ni–Co and products with elevated iron concentrations (up to 2.68 %). These data indicate that the population experimented in the course of metal-lurgical processing of raw materials; they transitioned to smelting metal from sulphide ores or to the smelting of copper with sulphide or silicate nickel ores of the Ufaley Massif (deposits in the Chelyabinsk Region). South Ural craftsmen produced bronze and copper primarily using technologies for casting tools in one-sided (with flat cov-ers) and two-sided moulds. The casting was followed by refining operations using the cold forming technology with the intervals of low-temperature forging modes. This choice of temperature is justified in the procession of low-alloyed bronze. Clearly, the centre for metal production of the Alekseyevka-Sargary culture in the South Trans-Urals was a metallurgical one, with the development of both oxidised and sulphide deposits in the South Urals. Innovative technologies of smelting copper with chalcopyrite, arsenopyrite, and nickel-containing ores were introduced. The complex of tools attributed to the Alekseyevka-Sargary tribes from the Tobol area is...