Analysis of a black chrome coated copper absorber plate in a flat plate solar collector
- 1 September 2021
- journal article
- research article
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 45 (3), 473-478
- https://doi.org/10.1139/tcsme-2020-0145
Abstract
The depletion of conventional energy source, the need for unconventional energy is focused on solar energy as it is avail plentiful. Converting the solar energy in to thermal energy is the effective way of utilization of solar energy rather the conversion of electrical energy. This paper compared the behavior of solar collector at 30º and 45º angles with black chrome coated absorber plate without and with glass reflectors. In the view of performance enhancement of the collector, the reflector was adjusted to maximize the incident ray for every hour. It is found that the collector fixed at 30º with ground heats the water better and again the performance can be increased by the reflector.Keywords
This publication has 10 references indexed in Scilit:
- Variation of reflected radiation from all reflectors of a flat plate solar collector during a yearEnergy, 2015
- Thermodynamic Modeling of the Multiple Parabolic Reflector Flat Panel CollectorEnergy Procedia, 2014
- Optimal position of flat plate reflectors of solar thermal collectorEnergy and Buildings, 2012
- Solar thermal collector augmented by flat plate booster reflector: Optimum inclination of collector and reflectorApplied Energy, 2011
- Influence of Operation Parameters on Metal Deposition in Bright Nickel-plating ProcessPortugaliae Electrochimica Acta, 2011
- Optimal design of orientation of PV/T collector with reflectorsApplied Energy, 2010
- Influence of reflectance from flat aluminum concentrators on energy efficiency of PV/Thermal collectorApplied Energy, 2010
- Toward Cost-Effective Solar Energy UseScience, 2007
- A Linear Parabolic Trough Solar Collector Performance ModelPublished by ASME International ,2007
- The effect of plane booster reflectors on the performance of a solar air heater with solar cells suitable for a solar dryerEnergy Conversion and Management, 1991