Resolver Decoding Method Using Hilbert Transform and ATO
Open Access
- 4 May 2021
- journal article
- research article
- Published by Hindawi Limited in Journal of Electrical and Computer Engineering
- Vol. 2021, 1-7
- https://doi.org/10.1155/2021/5579692
Abstract
Resolvers are widely used in electric vehicles, trains, and other harsh fields because of their robustness. However, the resolver outputs two orthogonal analog signals, which make the resolver decoding either high hardware cost or poor decoding accuracy. A noise robust resolver decoding method using Hilbert transform and angle-tracking observer (ATO) is proposed in this paper. Firstly, Hilbert transform is employed to obtain the modular envelopes of resolver signals. Next, the modular envelopes are filtered, and their quadrants are recognized by the polarity relation of the resolver signals and the modular envelope extreme point. Then, the ideal demodulating signals are gained through the linearization of the envelope zero point. Finally, the improved ATO is used to obtain the rotor angle by iteratively calculating the demodulating signal. The effectiveness of the proposed method is verified by experiments under various rotor speed conditions and compared with other methods in noise immunity. The results show that the proposed method can control the decoding error within 0.5° when the SNR is 30dB, which provides a high-precision and low-cost decoding scheme for practical applications.Keywords
Funding Information
- Scientific Research Fund of Hunan Education Department of China (18A272)
This publication has 18 references indexed in Scilit:
- Differential evolution algorithm with wavelet basis function and optimal mutation strategy for complex optimization problemApplied Soft Computing, 2020
- Classification of power quality disturbances based on KF‐ML‐aided S‐transform and multilayers feedforward neural networksIET Generation, Transmission & Distribution, 2020
- Fault analysis in solar–wind microgrid using multi‐resolution analysis and Stockwell transform‐based statistical analysisIET Science, Measurement & Technology, 2020
- Detection and Classification of Power Quality Disturbances in Power System Using Modified-Combination between the Stockwell Transform and Decision Tree MethodsEnergies, 2020
- Resolver-To-Digital Conversion Based on Acceleration-Compensated Angle Tracking ObserverIEEE Transactions on Instrumentation and Measurement, 2018
- A Novel Technique for Fundamental and Harmonic Parameter Estimation Using Nonergodic $S$ -TransformIEEE Transactions on Instrumentation and Measurement, 2018
- A Method of Resolver-to-Digital Conversion Based on Square Wave ExcitationIEEE Transactions on Industrial Electronics, 2017
- Software-Based Resolver-to-Digital Converter for DSP-Based Drives Using an Improved Angle-Tracking ObserverIEEE Transactions on Instrumentation and Measurement, 2012
- A Resolver Angle Estimator Based on Its Excitation SignalIEEE Transactions on Industrial Electronics, 2008
- Position Measurement in Industrial Drives by Means of Low-Cost Resolver-to-Digital ConverterIEEE Transactions on Instrumentation and Measurement, 2007