Skin Panel Optimization of the Common Research Model Wing Using Sandwich Composites
- 1 March 2022
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 59 (2), 386-399
- https://doi.org/10.2514/1.c036551
Abstract
This paper presents an approach for optimizing practical commercial-scale aircraft wings using sandwich composites in a preliminary design stage. The approach uses lamination parameters as design variables in a continuous optimization step. Structural constraints for classic composite laminate design such as material failure and buckling, and for sandwich design such as crimping, wrinkling, dimpling, and core shear failure are accounted for using industrial-standard and empirical methods driven by finite element analyses. As an application case, optimization studies are performed at a skin panel level on the open-source Common Research Model wing. Optimization trends show areas of the wingbox where sandwich composites offer superior structural performance, as well as potential cost savings by requiring lesser number of stringers. The aim and novelty of this work is to present performance gains that can be achieved using sandwich composites in primary load-carrying aircraft structures when compared with monolithic composite designs and, through this, to provide a motivation for further research and development in sandwich composites and their applications.Keywords
This publication has 51 references indexed in Scilit:
- Optimization of Sandwich Composites Fuselages Under Flight LoadsApplied Composite Materials, 2010
- Honeycomb Core and the Myths of Moisture IngressionApplied Composite Materials, 2009
- New peel stopper concept for sandwich structuresComposites Science and Technology, 2007
- Optimum design of composite plate wings for aeroelastic characteristics using lamination parametersComputers & Structures, 2007
- Wrinkling and Compression Failure Transition in Sandwich PanelsJournal of Sandwich Structures & Materials, 2004
- Optimization for Buckling of Composite Sandwich PlatesAIAA Journal, 1997
- Composite sandwich structure optimization with application to satellite componentsAIAA Journal, 1996
- Optimum Design of Laminated Composite Plates Using Lamination ParametersAIAA Journal, 1993
- Stiffness Optimization of Orthotropic Laminated Composites Using Lamination ParametersAIAA Journal, 1991
- The method of moving asymptotes—a new method for structural optimizationInternational Journal for Numerical Methods in Engineering, 1987