Tilt Pad Bearing Distributed Pad Inlet Temperature With Machine Learning—Part II: Morton Effect
- 3 September 2021
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 144 (6)
- https://doi.org/10.1115/1.4052172
Abstract
The Morton effect (ME) occurs when a bearing journal experiences asymmetric heating due to synchronous vibration, resulting in thermal bowing of the shaft and increasing vibration. An accurate prediction of the journal's asymmetric temperature distribution is critical for reliable ME simulation. This distribution is strongly influenced by the film thermal boundary condition at the pad inlets. Part I utilizes machine learning (ML) to obtain a two-dimensional radial and axial distribution of temperatures over the leading-edge film cross section. The hybrid finite volume method (FVM)—bulk flow method of Part I eliminated film temperature discontinuities and is utilized in Part II for improving accuracy and efficiency of ME simulation.Keywords
This publication has 28 references indexed in Scilit:
- Experimental comparison of the performance of a journal bearing with a single and a twin axial groove configurationTribology International, 2012
- A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton EffectJournal of Engineering for Gas Turbines and Power, 2012
- Simplified Morton Effect Analysis for Synchronous Spiral InstabilityJournal of Vibration and Acoustics, 2010
- Multi-orifice active tilting-pad journal bearings—Harnessing of synergetic coupling effectsTribology International, 2010
- Thermohydrodynamic analysis of a worn plain journal bearingTribology International, 2003
- Transient thermoelastohydrodynamic analysis for safe operating conditions of a tilting-pad journal bearing during start-upTribology International, 2000
- Orbit Induced Journal Temperature Variation in Hydrodynamic BearingsJournal of Tribology, 1999
- The dynamic nature of rotor thermal bending due to unsteady lubricant shearing within a bearingProceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences, 1994
- Journal bearing differential heating evaluation with influence on rotor dynamic behaviourProceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences, 1993
- Experimental Study of Tilting-Pad Journal Bearings—Comparison With Theoretical Thermoelastohydrodynamic ResultsJournal of Tribology, 1992