IoT-Based electricity usage monitoring and controlling system using Wemos and Blynk application
Open Access
- 29 July 2019
- journal article
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Teknologi dan Sistem Komputer
- Vol. 7 (4), 161-165
- https://doi.org/10.14710/jtsiskom.7.4.2019.161-165
Abstract
This study aims to apply the Internet of Things (IoT) technology to control electronic devices and monitor the electrical power usage remotely via the Internet. The system was implemented using Wemos D1, ACS712 current sensor, relay, and the Blynk application as the system interface on the smartphone. The system used an average of 0.4-3.3 seconds to respond to commands from the Blynk application via a Wifi connection at a distance of 50-1000 meters and the device control and power monitoring system can function properly. The system response time was not affected by distance. This system with Wifi access can be an alternative to control devices and monitor their power usage in addition to a longer time of SMS access and shorter range of Bluetooth.Keywords
Funding Information
- Universitas Amikom Yogyakarta, Indonesia
This publication has 5 references indexed in Scilit:
- Rancang Bangun Alat Monitoring Pergerakan Objek pada Ruangan Menggunakan Modul RCWL 0516Jurnal Teknik Elektro, 2018
- Perancangan Prototipe Sistem Kontrol Suhu dan Kelembaban pada Gedung Walet dengan Mikrokontroler Berbasis MobileJurnal Edukasi dan Penelitian Informatika (JEPIN), 2018
- Sistem Cerdas Reservasi dan Pemantauan Parkir pada Lokasi Kampus Berbasis Konsep Internet of ThingsJurnal Teknologi dan Sistem Komputer, 2018
- Sistem Kendali Lampu Rumah Menggunakan Smartphone AndroidJurnal Teknoinfo, 2017
- Perancangan Sistem Kendali pada Alat Listrik Rumah Tangga Menggunakan Media Pesan Singkat (SMS)Jurnal Teknologi dan Sistem Komputer, 2016