Analysis of the combustion process of diesel fuel in the cylinder 2F 10.5 / 12.0 depending on the frequency of rotation of the crankshaft
Open Access
- 1 January 2020
- journal article
- research article
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 734 (1), 012211
- https://doi.org/10.1088/1757-899x/734/1/012211
Abstract
Stable operation of the diesel engine at all speeds is provided by the adjustment of the fuel equipment, the structural parameters of the combustion chamber, the physical and chemical properties of the fuel, etc. To increase the range of operating speeds of the engine and increase its injectivity, studies are being conducted aimed at optimizing the processes of fuel combustion, improving the adjustments of the fuel equipment, shape and size of the combustion chamber. This paper presents an analysis of the performance of the diesel fuel combustion process in a 2F 10.5/12.0 diesel cylinder at rated load at various speed modes of operation with a fixed mechanism for controlling the cycle fuel supply. When conducting a laboratory study, measurements were made of hourly fuel and air consumption in all modes of operation. The diesel was installed on a loading stand with a weight mechanism, with which the torque measurement was carried out. The results of indexing the working process of the diesel engine, the characteristics of heat. Calculation of heat release rate and gas temperature indicator was carried out by the CNIDI method.This publication has 14 references indexed in Scilit:
- Evaluation of the Integral toxicity of Exhaust Gases of a Diesel Engine Operating on Natural Gas and Alcohol EmulsionsEcology and Industry of Russia, 2019
- Spray dynamics of HVO and EN590 diesel fuelsFuel, 2019
- Decrease in Toxicity of Vehicle Exhaust Gases of Car Diesel by Conversion to Alcohol-Fuel EmulsionsEcology and Industry of Russia, 2018
- Influence of biodiesel carbon chain length on in-cylinder soot processes in a small bore optical diesel engineFuel, 2018
- Heat release analysis of gasoline fumigation in a diesel engineEnergy Procedia, 2018
- Performance and combustion characteristics of a compression ignition engine running on diesel-biodiesel-ethanol (DBE) blends – Part 2: Optimization of injection timingFuel, 2018
- Effect of NiO nanoparticles on performance and emission characteristics at various injection timings using biodiesel-diesel blendsFuel, 2018
- Use of natural gas, methanol, and ethanol fuel emulsions as environmentally friendly energy carriers for mobile heat power plantsThermal Engineering, 2017
- Heat Release Analysis of Hydraulic Free Piston Diesel EngineEnergy Procedia, 2014
- Fast heat release characterization of a diesel engineInternational Journal of Thermal Sciences, 2008