Design of microstrip coupled-line bandpass filter
Abstract: This project contains basic information, design, 3D projection, simulation, and analysis of Microstrip Bandpass Filter. The filter was composed of the feed lines connected to the two ports with the parallel coupled lines between them. The separation between these elements is reduced to the minimum for the purpose of reducing the error. Ultimately, the microstrip bandpass filter was designed with a 400 MHz bandwidth. We end up with these result: at the 4.43 GHz, S11 parameter is -9.868 dB and S22 is -1.808 dB, while at the 4.83 GHz, S11 is -9.995 dB and S22 is -1.826 dB.
Keywords: microstrip / bandpass filter / coupled line / GHz / S11 / S22 / Ultimately
Scifeed alert for new publicationsNever miss any articles matching your research from any publisher
- Get alerts for new papers matching your research
- Find out the new papers from selected authors
- Updated daily for 49'000+ journals and 6000+ publishers
- Define your Scifeed now
Click here to see the statistics on "Heritage and Sustainable Development" .