A comprehensive study on solidification (hot) cracking in austenitic stainless steel welds from a microstructural approach
- 9 October 2021
- journal article
- research article
- Published by Elsevier BV in International Journal of Pressure Vessels and Piping
- Vol. 194, 104560
- https://doi.org/10.1016/j.ijpvp.2021.104560
Abstract
No abstract availableKeywords
This publication has 40 references indexed in Scilit:
- Materials Development for Indian Nuclear Power Programme: an Industry PerspectiveEnergy Procedia, 2011
- Effect of cooling rate on hot-crack susceptibility of duplex stainless steelMaterials Science and Engineering: A, 2009
- EBSD as a tool to identify and quantify bainite and ferrite in low‐alloyed Al‐TRIP steelsJournal of Microscopy, 2008
- Microstructure and Texture Changes in a Low-alloyed TRIP-aided Steel Induced by Small Plastic DeformationISIJ International, 2006
- Solidification cracking of superalloy single- and bi-crystalsActa Materialia, 2004
- On the Behavior of Hot Crack Formation During Solidification in Fe–Ni AlloysAdvanced Engineering Materials, 2003
- Influence of Cooling Rate on the Hot Cracking Formation of Nickel Rich Alloys.ISIJ International, 2002
- Microstructural evolution during solidification of austenitic stainless steel weld metals: A color metallographic and electron microprobe analysis studyMaterials Characterization, 1997
- The influence of crystallographic texture on diffraction measurements of residual stressActa Metallurgica et Materialia, 1993
- Effects of ferrite content and microsegregation on solidification crack susceptibility of duplex stainless steel weld metalsWelding International, 1988