Drop-Weight Test for RC Frame Made of Polypropylene Fiber-Reinforced Concrete
- 25 January 2018
- journal article
- research article
- Published by Japan Concrete Institute in Journal of Advanced Concrete Technology
- Vol. 16 (1), 36-45
- https://doi.org/10.3151/jact.16.36
Abstract
Drop-weight tests and static loading tests of RC frames made of polypropylene fiber-reinforced concrete are conducted to observe shock resistance performance and residual ductility. Experimental variables are fiber content and mass of the drop weight. In the impact test, the maximum drifts of the specimens are proportional to the mass of the drop weight although several collisions occur due to rebounding and the maximum acceleration is not always increased as the mass increases. In a static loading test, the initial stiffness is improved and crack lengths in the hinge areas of the columns are reduced by mixing the polypropylene fibers.Keywords
This publication has 17 references indexed in Scilit:
- Seismic pounding and collapse behavior of neighboring buildings with different natural periodsNatural Science, 2012
- Visual retrieval of concrete crack properties for automated post-earthquake structural safety evaluationAutomation in Construction, 2011
- Building pounding damage observed in the 2011 Christchurch earthquakeEarthquake Engineering & Structural Dynamics, 2011
- Experimental study on earthquake‐induced pounding between structural elements made of different building materialsEarthquake Engineering & Structural Dynamics, 2009
- Numerical derivation of pressure–impulse diagrams for prediction of RC column damage to blast loadsInternational Journal of Impact Engineering, 2008
- Crack Detection in a Concrete Beam using Two Different Camera TechniquesStructural Health Monitoring, 2006
- Dynamic properties of polypropylene fiber-reinforced concrete slabsCement and Concrete Composites, 1997
- Building pounding damage during the 1989 Loma Prieta earthquakeEngineering Structures, 1997
- Fibre reinforced concrete beams under impact loadingCement and Concrete Research, 1996
- Impact properties of steel fibre reinforced concrete in bendingInternational Journal of Cement Composites and Lightweight Concrete, 1983