PEMBUATAN DAN KARAKTERISASI KOMPOSIT RESIN – ABU GOSOK DAN RESIN – SEKAM PADI

Abstract
Abstrak Telah dilakukan proses pembuatan dua buah material komposit dengan masing-masing filler berupa abu gosok dan sekam padi, matriks berupa resin. Pada komposit resin – abu gosok, perbandingan volume antara filler dan matriks adalah 1:1, sedangkan pada komposit resin – sekam padi digunakan tiga perbandingan volume antara filler dan matriks, yaitu 1:1, 1:2, dan 2:1. Setelah proses pembuatan selesai, dilakukan pengujian TGA dan pengujian kelenturan tiga titik untuk setiap jenis komposit yang dihasilkan. Pada hasil pengujian TGA, didapatkan bahwa penurunan bobot paling besar yang pada komposit resin – abu gosok terjadi pada temperatur 390,29 ºC, sedangkan pada komposit resin – sekam padi terjadi pada temperatur 399,86 ºC. Hasil pengujian kelenturan tiga titik menunjukkan bahwa modulus elastisitas untuk sampel komposit resin – abu gosok adalah sebesar 4,97 109 N/m2, sedangkan untuk sampel-sampel resin – sekam padi berada pada orde 108 N/m2 dan 106 N/m2. Secara keseluruhan, dapat dikatakan bahwa komposit resin – sekam padi yang dihasilkan memiliki ketahanan temperatur yang lebih baik dan lebih elastis dibandingkan komposit resin – abu gosok. Kata-kata kunci: komposit, resin, abu gosok, sekam padi. Abstract We have done the fabrication of two kinds of composite material the fillers that we used rub ash for one type of composite and the husk of rice for another, the matrix for both is resin. The resin – rub ash composite, the volume ratio of filler and matrix is 1:1, while in the resin – husk of rice composite we used three volume ratios, those are 1:1, 1:2, and 2:1. After the process of fabrication was done, we did TGA test and three points flexural test for every composite we fabricated. The results of TGA test show that the most significant weight decrease of resin – rub ash composite occurred at 390,29 ºC, while the resin – rub ash composite's most considerable weight decrease occurred at 399,86 ºC. The results of three points flexural test show that elasticity of resin – rub ash composite is 4,97 x 109 N/m2, while elasticity modulus of all kinds of the resin – husk of rice composite is in order of 108 N.m2 and 106 N/m2. Overall, we can conclude that the resin – husk of rice composite is more heatproof and more elastic than the resin – rub ash composite. Keywords: composite, resin, rub ash, the husk of rice.