A Single Layer Dual-Polarization Printed Bow-Tie Slot Broadband Antenna with C-Band Stop
Published: 5 May 2021
Abstract: In this letter, a single layer dual-polarization printed bow-tie slot broadband antenna with C-band stop is presented. The proposed antenna consists of two pairs of mirror-symmetric and mutually perpendicular bow-tie slots with two coplanar waveguide (CPW)-fed. The proposed antenna has a very simple structure and the measured results demonstrate the antenna performance can be achieved a wide impedance bandwidth 79.1% for | S11 | and | S22 | ≦ -10dB from 1.3 ~ 3 GHz and 62.3% from 5.25 ~ 10 GHz, which has been implemented the operating band for GPS (1575MHz), WLAN band (2.4GHz and 5.8GHz), and 6 GHz unlicensed spectrum (5.925 ~ 7.125 GHz), UWB band (3.1 ~ 10.6 GHz), LTE Upper band (LTE, 1710 ~ 2690 MHz) applications. The measured in-band isolation performance between the two ports | S21 | ≦ -15.5dB from 1.4 ~ 3 GHz, and | S21 | ≦ -21dB from 5 ~ 10 GHz is significantly achieved and the radiation pattern, peak gain, and efficiency of the proposed antenna are measured as well. In the end, the simulated and measured radiation patterns are compared.
Keywords: structure / LTE / Layer / stop / dual / S21 / proposed antenna / Polarization / Broadband
Scifeed alert for new publicationsNever miss any articles matching your research from any publisher
- Get alerts for new papers matching your research
- Find out the new papers from selected authors
- Updated daily for 49'000+ journals and 6000+ publishers
- Define your Scifeed now
Click here to see the statistics on "WSEAS TRANSACTIONS ON ELECTRONICS" .