Stretchable Conductors Fabricated by Stencil Lithography and Centrifugal Force-Assisted Patterning of Liquid Metal
Open Access
- 29 November 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 3 (12), 5423-5432
- https://doi.org/10.1021/acsaelm.1c00884
Abstract
Embedding liquid metals (LMs) into an elastomer is emerging as a promising strategy for stretchable conductors. Existing manufacturing techniques are struggling between spatial resolution and process complexity and are limited to chemically resistant substrates. Here, we report on a hybrid process combining stencil lithography and centrifugal force-assisted patterning of liquid metal for the development of LM-based stretchable conductors. The selective wetting behavior of oxide-removed eutectic gallium–indium (EGaIn) on metal patterns defined by stencil lithography enables micrometer scale LM patterns on an elastomeric substrate. Stencil lithography allows for defining metal regions without harsh chemical treatments, making it suitable for a wide range of substrates. Microscale LM patterns are achieved by efficiently removing the excess material by the centrifugal forces experienced from spinning the substrate. The proposed approach allows for the creation of LM patterns with a line width as small as 2 μm on a stretchable poly(dimethylsiloxane) (PDMS) substrate. The electrical measurement results show that the fabricated EGaIn devices can endure 40% mechanical strain over several thousands of cycles. Furthermore, a stencil design using microbridges is proposed to address the mechanical stability issue in stencil lithography. An EGaIn conductor with a serpentine structure and an interdigitated capacitor are fabricated and characterized. The results demonstrate that the patterned serpentine conductors retain their functionality with applied mechanical strain up to 80%. The performance of the interdigitated capacitors upon applied strain is in good agreement with the theoretical estimation. Finally, we demonstrate our approach also on poly(octamethylene maleate (anhydride) citrate) (POMaC) substrates to broaden the use of the proposed method to not only flexible and stretchable but also biodegradable substrates, opening a way for in vivo transient microsystem engineering. The work presented here provides a versatile and reliable approach for manufacturing stretchable conductors.Keywords
Funding Information
- H2020 European Research Council (742685)
This publication has 55 references indexed in Scilit:
- Stretchable, Transparent, Ionic ConductorsScience, 2013
- A Physically Transient Form of Silicon ElectronicsScience, 2012
- Highly Conductive and Stretchable Silver Nanowire ConductorsAdvanced Materials, 2012
- Three-dimensional nanonetworks for giant stretchability in dielectrics and conductorsNature Communications, 2012
- Flexible Plasmonics on Unconventional and Nonplanar SubstratesAdvanced Materials, 2011
- Paper ElectronicsAdvanced Materials, 2011
- Stretchable gold conductors embedded in PDMS and patterned by photolithography: fabrication and electromechanical characterizationJournal of Micromechanics and Microengineering, 2010
- Reusability of nanostencils for the patterning of Aluminum nanostructures by selective wet etchingMicroelectronic Engineering, 2008
- Preparation and oxygen/nitrogen permeability of PDMS crosslinked membrane and PDMS/tetraethoxysilicone hybrid membraneJournal of Membrane Science, 2007
- Corrugated membranes for improved pattern definition with micro/nanostencil lithographySensors and Actuators A: Physical, 2006