The Separation of Oil/Water Mixtures by Modified Melamine and Polyurethane Foams: A Review
Open Access
- 27 November 2021
- Vol. 13 (23), 4142
- https://doi.org/10.3390/polym13234142
Abstract
Melamine (MA) and polyurethane (PU) foams, including both commercial sponges for daily use as well as newly synthesized foams are known for their high sorption ability of both polar and unipolar liquids. From this reason, commercial sponges are widely used for cleaning as they absorb a large amount of water, oil as well as their mixtures. These sponges do not preferentially absorb any of those components due to their balanced wettability. On the other hand, chemical and physical modifications of outer surfaces or in the bulk of the foams can significantly change their original wettability. These treatments ensure a suitable wettability of foams needed for an efficient water/oil or oil/water separation. MA and PU foams, dependently on the treatment, can be designed for both types of separations. The particular focus of this review is dealt with the separation of oil contaminants dispersed in water of various composition, however, an opposite case, namely a separation of water content from continuous oily phase is also discussed in some extent. In the former case, water is dominant, continuous phase and oil is dispersed within it at various concentrations, dependently on the source of polluted water. For example, waste waters associated with a crude oil, gas, shale gas extraction and oil refineries consist of oily impurities in the range from tens to thousands ppm [mg/L]. The efficient materials for preferential oil sorption should display significantly high hydrophobicity and oleophilicity and vice versa. This review is dealt with the various modifications of MA and PU foams for separating both oil in water and water in oil mixtures by identifying the chemical composition, porosity, morphology, and crosslinking parameters of the materials. Different functionalization strategies and modifications including the surface grafting with various functional species or by adding various nanomaterials in manipulating the surface properties and wettability are thoroughly reviewed. Despite the laboratory tests proved a multiply reuse of the foams, industrial applications are limited due to fouling problems, longer cleaning protocols and mechanical damages during performance cycles. Various strategies were proposed to resolve those bottlenecks, and they are also reviewed in this study.Keywords
This publication has 128 references indexed in Scilit:
- Versatile Fabrication of Ultralight Magnetic Foams and Application for Oil–Water SeparationACS Nano, 2013
- Facile Removal and Collection of Oils from Water Surfaces through Superhydrophobic and Superoleophilic SpongesThe Journal of Physical Chemistry C, 2011
- The right kind of interior for multifunctional electrode architectures: carbon nanofoam papers with aperiodic submicrometre pore networks interconnected in 3DEnergy & Environmental Science, 2011
- Wetting Behavior of Water and Oil Droplets in Three-Phase Interfaces for Hydrophobicity/philicity and Oleophobicity/philicityLangmuir, 2009
- Science and technology for water purification in the coming decadesNature, 2008
- Effect of salt additive on the formation of microporous poly(vinylidene fluoride) membranes by phase inversion from LiClO4/Water/DMF/PVDF systemPolymer, 2003
- Destabilisation of oil–water emulsions and separation by dissolved air flotationWater Research, 2002
- Separating oil from oil-water emulsions by electroflotation techniqueSeparations Technology, 1996
- Removal of organics from offshore produced waters using nanofiltration membrane technologyEnvironmental Progress, 1990
- CCL.—Angles of contact and polarity of solid surfacesJournal of the Chemical Society, Transactions, 1925