Data Model Optimized for Automatic Analysis Method of Corrosion Formation State of Typical Disconnectors
- 21 January 2022
- conference paper
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2022 IEEE 2nd International Conference on Power, Electronics and Computer Applications (ICPECA)
Abstract
The normal working state of disconnector is a very important part of the whole power system. It not only affects the operation safety of power grid, but also has a direct impact on the service life and reliability of equipment. At present, there are serious opening and closing problems of circuit breakers in most areas. Therefore, aiming at the corrosion formation state of typical disconnectors, this paper optimizes its automatic analysis method and establishes a data model. Firstly, this paper introduces the operating conditions and functions of disconnectors. Then, this paper expounds the causes of corrosion formation, and designs a data model to analyze the formation state of corrosion. Finally, the experimental observation on the corrosion formation of typical disconnector materials is carried out. After the experimental test, the corrosion degree of the four materials is different. The metal surface finish is grade 13 and the metal composition is industrial pure aluminum brand. The disconnector No. 5056 has high corrosion resistance.Keywords
This publication has 8 references indexed in Scilit:
- Influence of Formation Conditions on Corrosion Behavior of PEO-Coatings during Salt-Spray TestSolid State Phenomena, 2020
- Formation and Corrosion Behavior of Nickel/Alumina NanocompositesSolid State Phenomena, 2020
- Development of an Automatic, High-Throughput Structural Refinement Method Using Rietveld AnalysisACS Combinatorial Science, 2019
- Research on Topology Optimization Method for Typical WingsJournal of Aerospace Science and Technology, 2019
- An electrochemical method based on OCP fluctuations for anti-corrosion alloy composition optimizationAnti-Corrosion Methods and Materials, 2018
- Optimization of ecological node layout and stability analysis of ecological network in desert oasis:a typical case study of ecological fragile zone located at Deng Kou County(Inner Mongolia)Ecological Indicators, 2018
- Effect of Temperature on Scale Formation in High-Temperature Corrosion by Model Naphthenic Acids and Sulfur Compounds under Replenishing ConditionsEnergy & Fuels, 2017
- Evaluation of Corrosion Product Activity in a Typical PWR with Extended Cycles and Flow Rate PerturbationsWorld Journal of Nuclear Science and Technology, 2017