Improved hemocompatibility of polysulfone hemodialyzers with Endexo® surface modifying molecules

Abstract

Anticoagulation therapy is widely used to reduce clotting during hemodialysis (HD), but may cause adverse effects in end-stage kidney disease patients. A new hemodialyzer with a membrane modified by surface modifying molecule was developed to improve hemocompatibility that aimed to reduce the need for anticoagulation during dialysis treatments. We compared membrane surface characteristics and in vitro hemocompatibility of the new hemodialyzer to the standard polysulfone (PSF) hemodialyzer membrane. Scanning electron microscopy, contact angle measurement (68° ± 3° test vs. 41.6° ± 6° control), and X-ray photoelectron spectrometry measurement for fluorine atomic % (7.4% ± 0.4% test vs. not detectable control), showed that the membrane surface was modified with surface modifying macromolecule (SMM1) but maintained membrane structure and surface hydrophilicity. Zeta potential of the blood-contacting surface showed that the absolute surface charge was reduced at neutral pH (−3.3 mV ± 1.1 mV test vs. −15.6 mV ± 1.0 mV control). Platelet count reduction was significantly less for the SMM1-modified dialyzer (40.88% ± 21.89%) compared to the standard PSF dialyzer (62.62% ± 34.13%), along with Platelet Factor 4 (1824.10 ng/ml ± 436.26 ng/ml test vs. 2479.00 ng/ml ± 852.96 ng/ml control). These studies demonstrate the successful incorporation of SMM1 into the new hemodialyzer with the expected results. Our in vitro experiments indicate that the SMM1-modified hemodialyzers could improve hemocompatibility compared to standard PSF hemodialyzers and have the potential to minimize the patient's anticoagulant requirements during HD. Additional research with SMM1 additives incorporated into the entire dialysis circuit and use in a clinical settings are required to confirm these promising findings.