630 ̊С±30 ̊С - Nodal (Critical) Temperature of Iron and Carbon Steel
- 27 July 2021
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1040, 191-199
- https://doi.org/10.4028/www.scientific.net/msf.1040.191
Abstract
The article deals with the problems of withstanding harsh temperatures by steel and iron. The authors of the work discuss iron denser high-temperature of γ modification and maximums and minimums of impact. In addition, the article analyses the transformations of iron and anomalies of properties: peak of heat capacity, acceleration of diffusion, etc. The authors take into account the consensus on the causes of polymorphism and the theoretical model of ferromagnetism. Besides, there is a consideration of "transformation" in interaction between Fe atoms that produce anomalies of steel properties. It is necessary to note the transformation detected by anomalies of any properties including mechanical. In the presented work the authors have made an attempt to prove transformations in iron at ~650 °C on the basis of extreme values of hardness and microhardness, metallographic structure, parameters of fine structure, precipitation resistance force depending on temperature. Therefore, the analysis of literature sources on physical and mechanical properties of iron and its derivatives has been made.Keywords
This publication has 8 references indexed in Scilit:
- Chemical heterogeneity as a factor of improving the strength of steels manufactured by selective laser melting technologyJournal of Mining Institute, 2020
- A Modern View of Anomalies in the Metal Groups of the Periodic System of D.I.MendeleevJournal of Mining Institute, 2019
- РАЗВИТИЕ ИССЛЕДОВАНИЙ ТЕПЛОВЫХ ПРОЦЕССОВ В ТЕХНОЛОГИИ МАШИНОСТРОЕНИЯJournal of Mining Institute, 2018
- The Formation of Surface Roughness of Piston Rings for the Purpose of Improving the Adhesion of Wear-Resistant CoatingsKey Engineering Materials, 2017
- Precipitation of disperse vanadium carbides at the interphase boundary upon the pearlitic transformation of a steelPhysics of Metals and Metallography, 2011
- Work-Hardening of Iron Single Crystals between 25°C and 900°CJapanese Journal of Applied Physics, 1970
- Further measurements of the thermal and electrical conductivity of iron at high temperaturesProceedings of the Physical Society, 1939
- Über die Änderung des Nikotingehaltes von Nikotinspritzbrühen bei AufbewahrungJournal of Pest Science, 1935