Characteristics of coconut shell-based activated carbon as Ni and Pt catalyst supports for hydrotreating Calophyllum inophyllum oil into hydrocarbon-based biofuel
- 1 October 2022
- journal article
- research article
- Published by Elsevier BV in Journal of Environmental Chemical Engineering
- Vol. 10 (5)
- https://doi.org/10.1016/j.jece.2022.108209
Abstract
No abstract availableKeywords
This publication has 75 references indexed in Scilit:
- A Review: Fundamental Aspects of Silicate Mesoporous MaterialsMaterials, 2012
- Comparison of palm oil, Jatropha curcas and Calophyllum inophyllum for biodiesel: A reviewRenewable and Sustainable Energy Reviews, 2011
- Preparation of activated carbons from cotton stalk by microwave assisted KOH and K2CO3 activationChemical Engineering Journal, 2010
- Preparation of high surface area activated carbon from coconut shells using microwave heatingBioresource Technology, 2010
- Physical Adsorption Characterization of Nanoporous MaterialsChemie Ingenieur Technik - CIT, 2010
- Preparation and characterization of activated carbon from bamboo by microwave-induced phosphoric acid activationIndustrial Crops and Products, 2010
- Noble Metal Sintering Suppression Technology in Three-way Catalyst: Automotive Three-way Catalysts with the Noble Metal Sintering Suppression Technology Based on the Support Anchoring EffectCatalysis Surveys from Asia, 2009
- Effects of carbonization temperatures on characteristics of porosity in coconut shell chars and activated carbons derived from carbonized coconut shell charsIndustrial Crops and Products, 2008
- Activated carbons prepared by pyrolysis of mixtures of carbon precursor/alkaline hydroxideJournal of Analytical and Applied Pyrolysis, 2007
- Biomass to biofuels, a chemical perspectiveGreen Chemistry, 2006