Finite Element Simulation of Residual Stress Determination Based on Spherical Indentation Accumulation Morphology
Open Access
- 1 January 2021
- journal article
- research article
- Published by Scientific Research Publishing, Inc. in World Journal of Mechanics
- Vol. 11 (06), 111-120
- https://doi.org/10.4236/wjm.2021.116009
Abstract
The introduction of residual stress during the processing of materials has an important impact on the properties of the materials, so it is important to accurately measure the residual stress of the material. This paper established a finite element model of spherical indentation under the action of non-equivalent biaxial residual stress. Then we extracted the full-field accumulation state near the indentation under different stress states from the simulation results and summarized the pile height distribution near the indentation under different stress states. From the simulation, we found that the maximum pile-up height near the indentation point presented a regular trend.Keywords
This publication has 19 references indexed in Scilit:
- Evaluation of microhardness, fracture toughness and residual stress in a thermal barrier coating system: A modified Vickers indentation techniqueSurface and Coatings Technology, 2012
- Investigation of through thickness residual stress distribution in equal channel angular rolled Al 5083 alloy by layer removal technique and X-ray diffractionMaterials & Design (1980-2015), 2012
- Home-school partnership and the construction of deviance: being and becoming the Goldfish familyJournal of Research in Special Educational Needs, 2010
- Experimental study on the surface stress measurement with Rayleigh wave detection techniqueApplied Acoustics, 2009
- Development of the high-precision incremental-step hole-drilling method for the study of residual stress in multi-layer materials: influence of temperature and substrate on ZrO2–Y2O3 8 wt.% coatingsSurface and Coatings Technology, 2002
- Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti–6Al–4V substrateBiomaterials, 2001
- Measurement of residual stress by load and depth sensing indentation with spherical indentersJournal of Materials Research, 2001
- Measurement of Residual Stresses by Load and Depth Sensing Spherical IndentationMRS Proceedings, 1999
- Measurement of residual stress in steel using the magnetic Barkhausen noise techniqueNDT & E International, 1998
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992